---

Now you must give information about your video card. This will be used for
the "Device" section of your video card in xorg.conf.

It is probably a good idea to use the same approximate amount as that detected
by the server you intend to use. If you encounter problems that are due to the
used server not supporting the amount memory you have, specify the maximum
amount supported by the server.

How much video memory do you have on your video card:

 1  256K
 2  512K
 3  1024K
 4  2048K
 5  4096K
 6  8192K
 7  16384K
 8  32768K
 9  65536K
10  131072K
11  262144K
12  Other

Enter your choice: 8

由於我的顯示卡上有32MB的記憶體，所以就輸入8囉。

You must now enter a few identification/description strings, namely an
identifier, a vendor name, and model name. Just pressing enter will fill
in default names (possibly from a card definition).

Your card definition is ** NVIDIA (generic)                   [nv].

The strings are free-form, spaces are allowed.
Enter an identifier for your video card definition:

按Enter鍵繼續。

For each depth, a list of modes (resolutions) is defined. The default
resolution that the server will start-up with will be the first listed
mode that can be supported by the monitor and card.
Currently it is set to:

"1280x1024" "1024x768" "800x600" "640x480" for 8-bit
"1280x1024" "1024x768" "800x600" "640x480" for 16-bit
"1280x1024" "1024x768" "800x600" "640x480" for 24-bit

Modes that cannot be supported due to monitor or clock constraints will
be automatically skipped by the server.

 1  Change the modes for 8-bit (256 colors)
 2  Change the modes for 16-bit (32K/64K colors)
 3  Change the modes for 24-bit (24-bit color)
 4  The modes are OK, continue.

Enter your choice: 4

選擇顯示模式，基本上一般的顯示卡對這些模式都支援，輸入4繼續。

Please specify which color depth you want to use by default:

  1  1 bit (monochrome)
  2  4 bits (16 colors)
  3  8 bits (256 colors)
  4  16 bits (65536 colors)
  5  24 bits (16 million colors)

Enter a number to choose the default depth.

5

選擇色彩品質，可選擇以24位元的方式來表現色彩，輸入5繼續。