Faculty

NCTU CSIE

Computer Science and Information Engineering

Faculty
     Eduation  |  Professional Background  |  Research  |  Professional Activities  |  Publications





JONG-CHUANG TSAY, PROFESSOR 蔡 中 川

EC529 54733
Homepage Send Email


交大發展館•計算機區

Education:

August 1969 - July 1975

Ph. D. (Computer Science), Institute of Electronics, National Chiao Tung University.

August 1966 - July 1968

M. S. (Computer Science), Institute of Electronics, National Chiao Tung University.

August 1961 - July 1966

B. S. (Electrical Engineering), Department of Electrical Engineering, National Cheng Kung University.

　

Professional Background:

August 1968 - July 1975

Instructor, Department of Computer Science, National Chiao Tung University.

August 1972 - August 1974

Visiting scholar, Center for Informatics Research, University of Florida, Florida, U. S. A..

August 1975 - July 1978

Associate professor, Department of Computer Engineering, National Chiao Tung University.

August 1978 -

professor, Department of Computer Science and information Engineering, National Chiao Tung University.

　

Research Interest:

Systolic Algorithms; parallel algorithms; computer-aided typesetting.

　

Professional Activity

Honor and Award

    1. Phi Tau Phi scholastic honor, 1968.

    2. Recipient of the nation-wide outstanding youth medal from China Youth Corps based on the implementation of the first home-made computer in Taiwan, 1972.

    3. The news that the first full page of Chinese Newspaper was produced by computer in NCTU was elected as the fourth of the ten big news in mass communication society, 1986.

    4. Outstanding paper award based on the following paper from the Computer Society of the Republic of China, 1989. (J. C. Tsay and Y. C. Hou, “On Equivalent Systolic Designs of Matrix Multiplication and Its Algebraic Representation,” Proceedings of ICS, Tamkang University, Taipei, R. O. C., Dec. 1988, Vol.1 pp. 247-252)

    5. Outstanding Instructor Award, Ministry of Education, 1991.

    6. Outstanding Research Award, National Science Council, 1990, 1991, and 1993.

    7. Outstanding Engineering Professor Award of R. O. C., 1992.

    8. Outstanding Talent of Information Science of R. O. C., 1992.

    9. Distinguished Research Award, National Science Council, 1994, 1996.

      10.

　

Major Research Achievement

    1. On the year of 1971, in Taiwan, there are only a few (about 30) computers and the term “computer” is still a new terminology to most people, we had built a “mini computer”. The computer was built from raher primitive components:
      (a) ALU : small scale integration IC (diode transistor logic, 930 series).
      (b) Random access memory small cores.
      (c) Control memory large cores.
      (d) Input/Output switches, display tubes.
      (e) Others transistors, resistors, capacitors,
      Although the computer is small, it is programmable and has a microprogrammable control unit. It is the first home-made computer in Taiwan. (reference: J. C. Tsay, “The First Home-Made Minicomputer in R. O. C.,” Science Monthly, Vol. 2, No. 9, pp. 48-54, 1971. (in Chinese))

    2. On 1981, the first programmable industrial robot was born in Taiwan. The robot consists of three parts: robot control unit, positioning control unit, and mechanical manipulator. The robot control unit is implemented on the microcomputer MEK 6800D2. The manipulator has five degrees of freedom consisting of three cylindrical axes, a wrist, and a jaw. (reference: J. C. Tsay, J. M. Shyu, and W. J. Tsai, “Implementation of a Programmable Industrial Robot,” Proceedings of NCS, NCKU, Tainan, R. O. C., Dec. 1981, pp. 15-29. (in Chinese))

    3. On 1986, in Taiwan, the first full page of Chinese newspaper had been composed and produced by computer. The composition system is implemented in VAX-11/780(VMS). A graphic display terminal Tektronix 4611 is used to simulate the composition operations. (reference: J. C. Tsay and P. Y. Chang, “A Full-Page Composition System for Chinese Newspaper,” Proceedings of 1986 MIST Workshop, Sept. 1986, pp. 513-524. (in Chinese))

      4.

　

Research Plan

My research interest in the future is on the field of parallel computation:
How to increase computation speed has been an important problem in the field of computer science for a long time. Using multiple processing elements (PEs) to form a parallel computer is an effective method to increase the computation speed, since all PEs can cooperately perform a computation. There are different types of parallel computers, such as pipelined computers, array processors, multiprocessor system, data flow computers, and VLSI algorithmic processors. In the last category, systolic array and wavefront array are two typical representatives. Systolic array and wavefront array are introduced on 1978 by Dr. H. T. Kung and Dr. S. Y. Kung respectively. Since then, how to design systolic algorithms/arrays and wavefront algorithms/arrays to solve various problems becomes an active field of research, especially, the former one. The importance of this field can be seen from the following. The structure of these arrays satisfy the regularity and local-communication characteristics. These characteristics matching with the current VLSI technology make the implementation of such arrays feasible. Many researchers has participated on this field, for examples, Dr. S. Y. Kung, D. I. Moldavian, P. Quinton, H. T. Kung, F. C. Lin, G. J. Li, M. S. Lam, M. C. Chen, J. A. B. Fortes, B. W. Wah, . . . International conferences on systolic array are held. Up to now, three conferences have been held on 1986, 1988, and 1989 respectively. Topics on this field of research in which I am currently interested are listed in the following:

    1. How to design parallel algorithms and parallel arrays, such as systolic arrays, from a given algorithm.

    2. How to express the design steps by formal algebraic notations.

    3. What are the algebraic relations between different equivalent designs?

    4. Design of parallel programming languages.

    5. Design of regular arrays.

    6. Implementation of CAD tools for designing parallel arrays.

　

Publication List

A. Journal Paper

    1. J. C. Tsay and C. C.Hsien, “A New Technique for the Alignment of Floating Point Numbers,” Science Bulletin of NCTU, Vol. 4, No. 1, pp. 79-91, Oct. 1969.

    2. J. C. Tsay, “A New FORTRAN Processing Program-FORTRAN Processor(19000)--for the IBM 1620 Computer,” Science Bulletin of NCTU, Vol. 5, No. 1, pp. 129-141, Apr. 1971.

    3. J. C.Tsay, “Study on the Speed of Convergence of the Central Limit Theorem by a Simulation Program,” Science Bulletin of NCTU, Vol. 6, No. 1, pp. 79-85, Feb. 1973.

    4. J. C. Tsay, “A New Language for Tabulation-CHITAL,” The Journal of NCTU, Vol. 1, pp. 41-56, Apr. 1976.

    5. J. C.Tsay, “Computerized System for Chinese Text Editing and Typesetting,” The Journal of NCTU, Vol. 2, pp. 23-26, Dec. 1976. (in Chinese)

    6. Y. J. Chen and J. C. Tsay, “Computer-Aided Chinese Printing System,” National Science Council Monthly (also presented in 1977 CLCS Conference, Washington, D. C. Sept. 1977, in English), Vol. 5, No. 7, July 1977. (in Chinese)

    7. J. C. Tsay and W. C. Tsai, “Design and Implementation of a Chinese FORTRAN System,” The Journal of NCTU, Vol. 6, pp. 23-29, Apr. 1979.

    8. J. C. Tsay and W. P. Yang, “Design and Implementation of a Programmable TV Game System,” The Journal of NCTU, Vol. 7, pp. 27-44, Apr. 1980.

    9. J. C. Tsay and Y. M. Chang, “Design and Implementation of a Chinese Terminal Controller,” International Journal on Computer Languages, Vol. 6, No. 3/4, pp. 155-163, Pergamon Press, 1981.

    10. J. C. Tsay and I. C. Wu, “Computer-Assisted Page Composition of a Chinese Newspaper,” Computer Processing of Chinese &Oriented Languages, Vol. 1, No. 2, pp. 124-134, CLCS, Dec. 1983.

    11. C. J. Lin and J. C. Tsay, “A Systolic Generation of Combinations,” BIT, Vol. 29, pp. 23-36, 1989.

    12. J. C. Tsay and Y. C. Hou, “Generating Function and Equivalent Transformation for Systolic Arrays,” Parallel Computing, Vol. 10, pp. 347-356, 1989.

    13. J. C. Tsay and J. M.Chen, “Design and Implementation of a Chinese TeX,” Journal of Computers, Vol. 1, No. 1, pp. 6-14, 1989. (in Chinese)

    14. Y. C. Hou and J. C. Tsay, “Equivalent Transformations on Systolic Design Represented by Generating Functions,” Journal of Information Science and Engineering, Vol. 5, pp. 229-250, 1989.

    15. J. C. Tsay and S. Yuan, “Systolic Flow,” Journal of Parallel and Distributed Computing, Vol. 8, pp. 286-291, 1990.

    16. J. C. Tsay and C. J. Lin, “A Systolic Design for Generating Combinations in Lexicographic Order,” Parallel Computing, Vol. 13, No. 1, pp. 119-125, 1990.

    17. J. C. Tsay and S. Yuan, “Some Combinatorial Aspects of Parallel Algorithm Design for Matrix Multiplication,” IEEE Trans. on Computers, Vol. 41, No. 3, pp. 355-360, Mar. 1992.

    18. Y. C. Hou and J. C. Tsay “On Equivalent Systolic Designs of LU Decomposition and Its Algebraic Representation,” The Computer Journal, Vol. 35, No. 6, pp. 662-666, Dec. 1992.

    19. S. J. Su, Y. S. Kuo, and J. C. Tsay “ Adaptable Quad Tree Techniques,” INTEGRATION, the VLSI Journal, Vol. 15, pp. 51-71, 1993.

    20. J. C. Tsay and W. P. Lee, “An Optimal Parallel Algorithm for Generating Permutations in Minimal Change Order,” Parallel Computing, Vol. 20, pp. 353-361, 1994.

    21. W. P. Lee and J. C. Tsay, “A Systolic Design for Generating Permutations in Lexicographical Order,” Parallel Computing, Vol. 20, pp. 775-785, 1994.

    22. J. C. Tsay and W. P. Lee, “A Cost-Optimal Systolic Algorithm for Generating Subsets,” International Journal of Computer Mathematics, Vol. 50, pp. 1-10, 1994.

    23. S. Yuan and J. C. Tsay, “A Unified Approach to Designing Parallel Winograd's Algorithms,” IEE Proceedings: (Part E) Computers and Digital Techniques, Vol. 141, No. 3, pp. 161-168, 1994.

    24. P. Y. Chang and J. C. Tsay, “A Family of Efficient Regular Arrays for Algebraic Path Problems,” IEEE Trans. Computers, Vol. 43, No. 7, pp. 769-777, July 1994.

    25. J. C. Tsay and P. Y. Chang, “Design of Effectient Regular Arrays for Matrix Multiplication by Two Step Regularization,” IEEE Trans. Parallel and Distributed Systems, Vol. 6, No. 2, pp. 215-222, Feb. 1995.

    26. J. C. Tsay and P. Y. Chang, “Some New Design of 2-D Array for Matrix Multiplication and Transitive Closure,” IEEE Trans. Parallel and Distributed Systems, Vol. 6, No. 4, pp. 351-362, April 1995.

    27. J. C. Tsay and P. Y. Chang, “Design of Space-Optimal Regular Arrays for Algorithms with Linear Schedules,” IEEE Trans. Computers, Vol. 44, No. 5, pp. 683-694, May 1995. (NSC83-0408-E-009-044)

    28. J. C. Tsay and J. Y. Ke, “A New Approach to Finding Optimal Linear Schedules for Uniform Dependence Algorithms,” Parallel Algorithm and Applications, Vol. 7, No. 5, pp. 73-68, 1995. (NSC85-2213-E-009-103)

    29. J. C. Tsay and P.Y. Chang, “Designing Lower-Dimensional Regular Arrays,” Journal of Parallel and Distributed Computing, Vol. 33, pp. 24-32, 1996. (NSC85-2213-E-009-103)

    30. P.Y. Chang and J. C. Tsay, “A Timespace Mapping for Regular Arrays,” Parallel Algorithm and Applications, Vol. 10, pp. 37-48, 1996. (NSC83-0408-E-009-044)

    31. Y. C. Ho and J. C. Tsay, “Fully-Static Processor-Optimal Scheduling of Data Flow Graphs,” IEEE Signal Processing Letters, Vol. 4, No. 5, pp. 146-148, May 1997. (NSC87-2213-E-009-003)

    32. J. Y. Ke and J. C. Tsay, “Finding Space-optimal Linear Array for Uniform Dependence Algorithms with Arbitrary Convex Index Sets,” Journal of Information Science and Engineering, accepted for publication. (NSC86-2213-E-009-017)

    33. J. C. Tsay and P. Y. Chang, “An Approach to Designing Modular Extensible Linear Arrays for Regular Algorithms,” IEEE Trans. Computers, accepted for publication. (NSC84-2213-E-009-031)

    34. J. C. Tsay, “Designing a Systolic Algorithm for Generating Well-Formed Parenthesis Strings,” Parallel Processing Letters, Vol. 14, No. 1, pp. 83-97, Mar. 2004. (NSC89-2213-E-009-012)

      35.

B. Conference Paper

    1. J. T. Tou, J. C. Tsay, and J. K. Yoo, “Interactive Processing of Chinese Characters and Texts,” Proceedings of First International Symposium on Computers and Chinese I/O System, Academia Sinica, R. O. C., Aug. 1973, pp. 1-28.

    2. M. W. Du, J. C. Tsay, and C. C. Hsieh, “The Design of CHIPS-A Chinese Information Processing System,” Proceedings of ICS, Aug. 1975, Vol. 1, pp. 155-165.

    3. Y. J. Chen and J. C. Tsay, “Computer-Aided Chinese Printing System,” CLCS Coference, Washington, D. C., Sept. 1977.

    4. Y. H. Hong, J. C. Tsay, and S. M. Wu, “Design and Implementation of a Remote Terminal Control System,” Proceedings of ICS, 1980, Vol. 1, pp. 580-586.

    5. J. C. Tsay, J. M. Shyu, and W. J. Tsai, “Implementation of a Programmable Industrial Robot,” Proceedings of NCS, NCKU, Tainan, R. O. C., Dec. 1981, pp. 15-29. (in Chinese)

    6. W. P. Yang, M. W. Du, and J. C. Tsay, “Single-Pass Perfect Hashing for Data Storage and Retrieval,” Proceedings of Information Sciences and Systems, Baltimore, Maryland, May 1983, pp. 470-476.

    7. J. C. Tsay and H. J. Lee, “Magnification of Digitized Chinese Characters,” Proceedings of ICS, Tamkang University, Dec. 1984, Vol. 1, pp. 448- 454.

    8. J. C. Tsay and P. Y. Chang, “A Full-Page Composition System for Chinese Newspaper,” Proceedings of 1986 MIST Workshop, Sep. 1986, pp. 513-524. (in Chinese)

    9. J. W. Chang, Z. Chen, and J. C. Tsay, “A Real-Time Multi-Row Pipeline Image Processor,” Proceedings Of ICS, Dec. 1986, Vol. 1, pp. 515-524.

    10. J. C. Tsay and S. Yuan, “A Methodology for Designing Systolic Arrays,” Proceedings of NCS, 1987, Vol. 2, pp. 895-903.

    11. Y. C. Hou and J. C. Tsay, “An Algebraic Model for Representing Equivalent Designs of Systolic Arrays,” Proceedings of the ISMM International Symposium Mini and Microcomputers, Miami Beach, Florida, Dec. 1988, pp. 163-166.

    12. J. C. Tsay and Y. C. Hou, “On Equivalent Designs of Matrix Multiplication and Its Algebraic Representation,” Proceedings of ICS, Tamkang University, Taipei, R. O. C., Dec. 1988, Vol. 1, pp. 247-252.

    13. J. C. Tsay and S. Yuan, “A Model for Systolic Algorithms,” Proceedings of ICS, Tamkang University, Taipei, R. O. C., Dec. 1988, Vol. 1, pp. 373-378.

　

C. Other Publication

    1. J. C. Tsay, “Design and Experimentation of a 4x4x2 Memory,” Research Report of ESRC(NSC), pp. 595-608, Dec. 1969.

    2. P. K. Ku and J. C. Tsay, “Encoding of Chinese Characters,” Research Report of ESRC(NSC), pp. 397-406, 1970. (in Chinese)

    3. J. C. Tsay, “Introduction to the First Home-Made Minicomputer in R. O. C.,” Technical Report of NCTU, 1971. (in Chinese)

    4. J. C.Tsay, C. C. Hsieh, and C. C. Yang, “An Introduction to NCTU Mini-Computer,” Technical Report of NCTU, Vol. MC-001, pp. 1-10, Feb. 1971.

    5. J. C. Tsay, K. T. Chen, C. S. Chiu, W. H. Perny, and C. C. Yang, “The Memory of NCTU Mini-Computer,” Technical Report of NCTU, Vol. MC-001, pp. M.1-M.12, Feb. 1971.

    6. C. C. Yang, J. C. Tsay, S. M. Tsai, C. Y. Chen, and J. W. Chou, “Description of NCTU Minicomputer,” Technical Report of NCTU, Vol. MC-002, July 1971.

    7. J. C. Tsay, “The First Home-Made Minicomputer in R. O. C.,” Science Monthly, Vol. 2, No. 9 , pp. 48-54, 1971. (in Chinese)

    8. C. C. Lee, J. C. Tsay, and P. K. Ku, “Design of Supervisor Program for IBM 1620,” Research Report of ESRC(NSC), pp. 569-580, 1971.

    9. S. L. Lee, K. A. Hwang, and J. C.Tsay, “A Simulation of a Time-Sharing System on GPSS/360,” Technical Report of NCTU, Vol. CS-003, pp. 72-86, Oct. 1972.

    10. C. C. Hsieh and J. C. Tsay, “The Design of an Universal Integrated-Circuit Memory Unit,” Research Report of ESRC(NSC), pp. 863-870, 1972.

    11. J. C. Tsay, “Text Editing and File Management of CHIPS,” Research Report of ESRC(NSC), Nov. 1975. (in Chinese)

    12. J. C. Tsay and H. H. Kao, “Subroutines of the Text Editing and File Management of CHIPS,” Research Report of ESRC(NSC), 1975. (in Chinese)

    13. J. C. Tsay, “Design of a Chinese Text Editing System and its Illustrations,” Computer World, Department of Computer Science, NCTU, Vol. 1, pp. 1-9, Feb. 1977. (in Chinese)

    14. J. C. Tsay and L. M. Lee, “On DEC-10 SPICE, A Computer Program to Analyze Electronic Circuit,” Computer World, Department of Computer Science, NCTU, Vol. 1, pp. 23-35, Feb. 1977. (in Chinese)

    15. J. C. Tsay, R. C. Lin, W. C. Tsai, D. Y. Yeh, and S. S. Yu, “Application of Microcomputer on a Payroll System,” Technical Report of NCTU, Vol. 1-2, July 1977. (in Chinese)

    16. I. L. Chen, J. C. Tsay, and C. R. Chao, “A Microcomputer-Based Satellite Navigation Receiving System,” Research Report of ESRC(NSC), pp. 30.1-30.47, 1977.

    17. Z. Chen, J. C. Tsay, and C. G. Chung et al., “Computer-Assisted Program and Graphic Verification System for NC Part Programming,” Research Report of ESRC(NSC), pp. 18.1-18.114, 1978. (in Chinese)

    18. S. M. Wu and J. C. Tsay, “Implementation of a Microcomputer-Based Remote Terminal Controller,” Research Report of ESRC(NSC), pp. 20.1-20.52, 1979.

    19. C. Chen, J. C. Tsay, and C. G. Chung, “Design and implementation of a Small Laboratory Automation System,” Research Report of ESRC(NSC), pp. 33.1-33.201, 1979. (in Chinese)

    20. J. C. Tsay and C. Chen, “Design and Implementation of a Chinese Terminal,” Research Report of ESRC(NSC), pp. 28.1-28.84, 1980. (in Chinese)

    21. Z. Chen, J. C.Tsay, S. F. Sher, and S. Y. Lin, “Microcomputer-Based Image Scanner and Processor,” Research Report of ESRC (NSC), pp. 22.1-22.82, 1980.

    22. C. Chen, J. C.Tsay, and C. G. Chung, “The Design and Implementation of Small Laboratory Automation System:Part I (Design and Implementation of a Hierarchical Computer System for SLAS); Part II (Design and Implementation of a Real Time Multitask System in Slave mc for SLAS),” Research Report of ESRC(NSC), pp. 1-176, 1980.

    23. J. C. Tsay, C. Chen, T. F. Chang, and Z. T.Yang, “Design and Implementation of a Hierarchical Laboratory Automation System,” Research Report of ESRC(NSC), pp. B.20.1-B.20.180, 1982. (in Chinese)

    24. J. C. Tsay and H. C.Lin, “Design and Implementation of a Three Dimensional Graphic System for Solid Objects,” Computer Quarterly, Vol. 7, No. 2, pp. 34-51, 1983.

    25. J. C. Tsay and H. J. Lee, “An Automatic Typesetting System for a Small Section of Chinese Newspaper,” Computer Quarterly, Vol. 18, No. 4, pp. 41-62, Dec. 1984.

    26. J. C. Tsay, P.Y. Chang, S. Yuan, and J.Y. Ke, “Design of Efficient Parallel Matrix Algorithms,” Research Report of ESRC(NSC), pp. 1-229, Feb. 1993.

    27. J. C. Tsay, W.P. Lee, “Design Efficient Parallel Algorithms for Generating Elementary Combinatorial Objects,” Research Report of ESRC(NSC), pp. 1-105, Aug. 1993.

      28.

　

D. Book

    1. D. J. Liu, M. W. Du, C. C. Hsieh, C. T. Chang, J. C. Tsay, and S. Lin, The Comprehensive Dictionary of Chinese Character Index, Asian Associates and The Hwa-Yin Press Ltd., Oct. 1979. (in Chinese)

      2.

　

E. Thesis and Dissertation

    1. J. C. Tsay, “A Selection System for Coincident Current Memory,” Master Thesis, Institute of Electronics, NCTU, Hsinchu, Taiwan, R. O. C., 1968.

    2. J. C. Tsay, “Automatic-Processing System for Chinese Character Generation, Text Editing, and Typesetting,” Ph. D. Dissertation, Institute of Electronics, NCTU, Hsinchu, Taiwan, R. O. C., July 1974.

    3. Y. J. Chen (陳 永 建), “Computerized Chinese Typesetting System,” Master Thesis, Institute of Computer Science, NCTU, Hsinchu, Taiwan, R. O. C., June 1977. (advisor: J. C. Tsay)

    4. R. C. Lin (林 榮 春), “Design, Implementation, and Application of a Cross-Development System,” Master Thesis, Institute of Computer Science, NCTU, Hsinchu, Taiwan, R. O. C., June 1977. (advisor: J. C. Tsay)

    5. C. H. Lin (林 真 弘), “A Microcomputer-Based Multichannel Recording System,” Master Thesis, Institute of Computer Science, NCTU, Hsinchu, Taiwan, R. O. C., June 1977. (advisor: J. C. Tsay and C. F. Den) (in Chinese)

    6. Z. L. Lin(林 瑞 仁), “Study on the Controller for Computerized Controlled Signal System,” Master Thesis, Institute of Transportation Engineering, NCTU, Hsinchu, Taiwan, R. O. C., June 1978. (advisor: Z. F. Wang and J. C. Tsay)

    7. W. C. Tsai (蔡 汪 銓), “Design and Implementation of a Chinese FORTRAN System,” Master Thesis, Institute of Computer Science, NCTU, Hsinchu, Taiwan, R. O. C., June 1978. (advisor: J. C. Tsay)

    8. H. C. Lin (林 雄 騏), “Design andImplementation of a ThreeDimensional Graphic System for Solid Objects,” Master Thesis, Institute ofComputer Science, NCTU, Hsinchu, Taiwan, R. O. C., June 1978. (advisor: J. C. Tsay)

    9. C. R. Chou (周 慶 榮), “A Microcomputer-Based Position-FixingUnit for Satellite Navigation System,” Master Thesis, Institute of ComputerScience, NCTU, Hsinchu, Taiwan, R. O. C., June 1978. (advisor: J. C. Tsay and C. F. Den)

    10. W. P. Yang (楊 維 邦), “Design and Implementation of a Programmable TV Game System,” Master Thesis, Institute of Computer Science, NCTU, Hsinchu, Taiwan, R. O. C., June 1979. (advisor: J. C.Tsay)

    11. C. K. Fan (范 長 康), “A Microcomputer-BAsed Communication Controller for Computer Terminals,” Master Thesis, Institute of Computer Science, NCTU, Hsinchu, Taiwan, R. O. C., June 1979. (advisor: J. C. Tsay)

    12. Y. M. Chang (張 裕 明), “Design and Implementation of a Chinese Terminal Controller,” Master Thesis, Institute of Computer Engineering, NCTU, Hsinchu, Taiwan, R. O. C., June 1980. (advisor: J. C. Tsay) (in Chinese)

    13. Y. H. Hung (洪 應 輝), “Design and Implementation of Remote Terminal Control System,” Master Thesis, Institute of Computer Engineering, NCTU, Hsinchu, Taiwan, R. O. C., June 1980. (advisor: J. C. Tsay and S. M. Wu)

    14. I. C. Wu (吳 盈 志), “Computer-Assisted Page Make-Up of a Newspaper,” Master Thesis, Institute of Computer Engineering, NCTU, Hsinchu, Taiwan, R. O. C., June 1981. (advisor: J. C. Tsay)(in Chinese)

    15. W. J. Tsai (蔡 偉 建), “Implementation of a Programmable Industrial Robot,” Master Thesis, Institute of Computer Engineering, NCTU, Hsinchu, Taiwan, R. O. C., June 1981. (advisor: J. C. Tsay and J. M. Shyu) (in Chinese)

    16. T. F. Chang (張 宗 發), “Design and Implementation of a Hierarchical Laboratory Automation System -- Upper Level of System,” Master Thesis, Institute of Computer Engineering, NCTU, Hsinchu, Taiwan, R. O. C., June 1982. (advisor: J. C. Tsay and C. Chen) (in Chinese)

    17. Z. T. Yang (楊 仁 村), “Design and Implementation of a Hierarchical Laboratory Automation System -- Lower Level of System,” Master Thesis, Institute of Computer Engineering, NCTU, Hsinchu, Taiwan, R. O. C., June 1982. (advisor: J. C. Tsay and C. Chen) (in Chinese)

    18. Y. S. Chen (陳 原 森) , “A Computer-Aided Design System for Cartoon Animation,” Master Thesis, Institute of Computer Engineering, NCTU, Hsinchu, Taiwan, R. O. C., June 1982. (advisor: K. Y. Cheng and J. C. Tsay) (in Chinese)

    19. D. G. Cheng (錢 大 剛), “Simulation of Manipulator Movement for Collision Detection,” Master Thesis, Institute of Computer Engineering, NCTU, Hsinchu, Taiwan, R. O. C., June 1982. (advisor: C. S. Lin and J. C. Tsay)

    20. W. W. Su (蘇 文 武), “On the Analysis and Design of Systolic Arrays,” Master Thesis, Institute of Computer Engineering, NCTU, Hsinchu, Taiwan, R. O. C., June 1983. (advisor: F. C. Lin and J. C. Tsay) (in Chinese)

    21. Y. K. Hsu (許 永 高), “A Simulation System for Typesetting a Small Section of Chinese Newspaper Thru Automation,” Master Thesis, Institute of Computer Engineering, NCTU, Hsinchu, Taiwan, R. O. C., June 1983. (advisor: J. C. Tsay and K. J. Chen) (in Chinese)

    22. H. G. Chen (陳 宏 渠), “Document Processing System – Document Typesetting Subsystem,” Master Thesis, Institute of Computer Engineering, NCTU, Hsinchu, Taiwan, R. O. C., June 1983. (advisor: K. J. Chen and J. C. Tsay) (in Chinese)

    23. M. F. Liao (廖 敏 芳), “Automatic Page Composition System for a Chinese Newspaper,” Master Thesis, Institute of Computer Engineering, NCTU, Hsinchu, Taiwan, R. O. C., June 1983. (advisor: K. J. Chen and J. C. Tsay) (in Chinese)

    24. C. H. Liao (廖 慶 和), “Document Processing System – Form Formatting Subsystem,” Master Thesis, Institute of Computer Engineering, NCTU, Hsinchu, Taiwan, R. O. C., June 1983. (advisor: J. C. Tsay and K. J. Chen) (in Chinese)

    25. H. J. Lee (李 鴻 鈞), “An Automatic Typesetting System for a Small Section of Chinese Newspaper and Magnification of Digitized Character Pattern,” Master Thesis, Institute of Computer Engineering, NCTU, Hsinchu, Taiwan, R. O. C., June 1984. (advisor: J. C. Tsay) (in Chinese)

    26. J. W. Chang (張 厥 偉), “MPIP:A Real-Time Multi-Row Pipeline Image Processor,” Master Thesis, Institute of Computer Engineering, NCTU, Hsinchu, Taiwan, R. O. C., June 1986. (advisor: Z. Chen and J. C. Tsay) (in Chinese)

    27. P. Y. Chang (張 本 元), “A Full-Page Composition System for Chinese Newspaaper,” Master Thesis, Institute of Computer Engineering, NCTU, Hsinchu, Taiwan, R. O. C., June 1986. (advisor: J. C. Tsay) (in Chinese)

    28. T. L. Chia (賈 叢 林), “A Reconfigurable Multiprocessor Architecture for Parallel Image Processing,” Master Thesis, Institute of Computer Engineering, NCTU, Hsinchu, Taiwan, R. O. C., June 1986. (advisor: Z. Chen and J. C. Tsay) (in Chinese)

    29. S. Yuan (袁 思), “An Algebraic Notation for the Design and Verification of Systolic Arrays,” Master Thesis, Institute of Computer Engineering, NCTU, Hsinchu, Taiwan, R. O. C., June 1987. (advisor: J. C. Tsay)

    30. M. C. Kao (高 明 志), “Parallel Processing Approach in B-Spline Image Generation,” Master Thesis, Institute of Computer Engineering, NCTU, Hsinchu, Taiwan, R. O. C., June 1988. (advisor: Y. C. Hsueh and J. C. Tsay)

    31. J. M. Chen (陳 建 名), “Implementation of a Desk Top Publishing System,” Master Thesis, Institute of Computer Engineering, NCTU, Hsinchu, Taiwan, R. O. C., June 1988. (advisor: J. C. Tsay) (in Chinese)

    32. C. J. Lin (林 朝 枝), “Designing Systolic Algorithms for Some Problems,” Ph. D. Dissertation, Institute of Computer Science and Information Engineering, NCTU, Hsinchu, Taiwan, R. O. C., April 1989. (advisor: J. C. Tsay)

    33. C. C. Huang (黃 啟 成), “Using TeX to Create Floating Windows for Placing Figures in Text,” Master Thesis, Institute of Computer Engineering, NCTU, Hsinchu, Taiwan, R. O. C., June 1989. (advisor: J. C. Tsay) (in Chinese)

    34. Y. C. Hou (侯 永 昌), “An Algebraic Representation of Equivalent Transformations on Systolic Designs,” Ph. D. Dissertation, Institute of Computer Science and Information Engineering, NCTU, Hsinchu, Taiwan, R. O. C., May 1990. (advisor: J. C. Tsay)

    35. H. C. Yang (楊 宏 盛), “Implementation of Automated Index, Glossary, and Bibliography Generator for 中文TeX,” Master Thesis, Institute of Computer Science and Information Engineering, NCTU, Hsinchu, Taiwan, R. O. C., June, 1992. (advisor: J. C. Tsay) (in Chinese)

    36. H. W. Tsui (崔 小 威), “Building an Integrated Environment for Using 中文TeX on Workstation,” Master Thesis, Institute of Computer Science and Information Engineering, NCTU, Hsinchu, Taiwan, R. O. C., June, 1992. ( advisor: J. C. Tsay) (in Chinese)

    37. Y. H. Liu (劉 藝 侯), “Building a User-Friendly Environment for the Typesetting of English-Chinese Dictionaries with 中文TeX,” Master Thesis, Institute of Computer Science and Information Engineering, NCTU, Hsinchu, Taiwan, R. O. C., June, 1992. (advisor: J. C. Tsay) (in Chinese)

    38. S.J. Su (蘇 士 傑), “A Study of Quad Tree Structure for CAD,” Ph.D Dissertation, Institute of Computer Science and Information Engineering, NCTU, Hsinchu, Taiwan, R. O. C., July, 1993. (advisor: Y. S. Kuo and J. C. Tsay)

    39. S. Yuan (袁 思), “Designing Orbital Arrays for Matrix Multiplication Algorithms Based on Latin Squares,” Ph. D. Dissertation, Institute of Computer Science and Information Engineering, NCTU, Hsinchu, Taiwan, R. O. C., June, 1994. (advisor: J. C. Tsay)

    40. P.Y. Chang (張 本 元), “Design of Efficient Regular Arrays for Matrix Algorithms,” Ph.D Dissertation, Institute of Computer Science and Information Engineering, NCTU, Hsinchu, Taiwan, R. O. C., Jan. 1995. (advisor: J. C. Tsay)

      41.